Congratulations to my cousin Andrea! She got married last weekend to Dominic, so I made a laser-cut card for them:
I found the basic leafy design on Vectorstock.com (and here it is on Pinterest) and then tweaked it until it was heart-shaped.
Papercut 082 : Oh dear! I’m in the process of changing over my website host, and have been a week without being able to access my blog.
I’ve moved the old pages and blog posts across to the new host, but there are still a lot of tweaks that I need to make in order to get the site fully working again.
In the meantime, I continued to do my papercuttings every day, so now (belatedly) I am finally able to update the website with my latest papercuttings:
Day 82 of my papercutting adventure (using the “922 Decorative Vector Ornaments” book).
It might not look it, but this was quite a tricky design to cut. The design involved having to leave just tiny links of paper in order to hold the actual physical piece of paper together. So the overall piece got very lacy and delicate towards the end.
I’d cut similar designs to this one earlier on in this project (i.e. even before starting this ‘100 days’ project), but I didn’t really like the results, before. However, now that I’m getting more proficient at cutting by hand (and also at adapting designs so that they can be cut out but still look fairly attractive), the end result is quite close to what I had imagined in the first place:
Plus, it’s another art nouveau-style design, so that quite appeals to me, and it also makes any mistakes less obvious because the curves and swirls in the design make it harder to spot.
Here is something I’ve been playing with this week – the design of a laser-cut jewellery holder.
I made one for my mum last Christmas…
As you can see, it can hold lots of different types of jewellery (rings, necklaces, bracelets, watches, earrings). However, it still needs some tweaks.
As a very basic version though, this is the design that I used:
If you’ve got a laser cutter and you’d like to have a play with this design yourself, I’ve made a vector file available below.
(Click here for basic jewellery holder design for lasercutting)
Hope you found this post useful! If you think it might be of use to other makers/designers, please feel free to share the link to the post via Twitter (@LaserSister), Pinterest, Facebook (@LaserSister), etc…
Wherever I go my eye is always drawn to laser-cut and laser-etched items, and (as I mentioned in the last post) I was really pleased to see plenty of good quality laser-y products while I was on holiday earlier this month. In fact I was so pleased to see them that I even bought a few laser cut souvenirs.
This is a card that I bought in the Doge’s Palace. It’s got a nice simple front…
…and then when you open it you get the “wow” of the pop-up effect:
Here is a close-up of the inside:
This is the back of the card:
The makers are a bit mysterious – I can’t find them anywhere via the usual search engines – so if you can point me to their website please let me know! You can do that via the contact us page or Twitter (@LaserSister), or Facebook or the comments section below. Thanks!
I mentioned in yesterday’s post that I’d come back from our recent holiday with a few laser-cut souvenirs that caught my eye while we were away. Here’s another one. We visited Ceaușescu‘s bonkers giant palace while we were in Bucharest, and it was amazing and frightening in equal parts.
This piece is a bit more complex than the previous fridge magnet, because it’s also coloured, somehow. I’m not sure how it’s made, to be honest, apart from the shape itself being laser-cut from a sheet of wood. Maybe it’s a transfer/decal applied to the surface of the wood?:
If you know what the process is, please give me a shout – I would be very interested to find out! You can use the contact us form, or Twitter or Facebook or the comments section below. Thanks!
Laser Cut Souvenir Fridge Magnet – Belogradchik Rocks, Hungary
We got back from holiday last week and only just finished unpacking today – and I’d forgotten that while I was on holiday my eye had been caught by several laser-cut souvenirs.
This one is a laser cut souvenir fridge magnet from Belogradchik Rocks, in Bulgaria. Mmmm, laser-y!
I like the way that it has two layers to it. But whoever made it has left quite a bit of scorching/smoke-marking on the front, and I’d be really disappointed if I sold a piece like that. On the other hand, I’m too much of a perfectionist. Weird how it didn’t stop me buying a piece, but it would stop me selling one. Maybe I’ve got things the wrong way round?!
Laser cutters are so versatile that sometimes it’s really easy to get sidetracked, and think “I wonder if I could…” and then start on a whole new series of experiments. That’s how I ended up the other day wondering if I could create a birthday card with fairies on it. I’m not brilliant at drawing though, so I needed to try to find some royalty-free images that I could use as a basis for the designs, where I wouldn’t be infringing copyright and/or stealing someone else’s idea. At times like this, I usually turn to the brilliant Dover Books. They might just as well have “Royalty-Free Laser Cutting Resources” written all over them.
These books are absolutely great to use with art and design projects, including (of course) laser-cut and laser-etched projects. The books are specifically created for artists and craftspeople, to allow them to use the designs in their own projects. Once you have bought the book you may use the designs without having to pay royalties, and – more importantly – without breaking copyright laws.
As it says in the front of most of their books, “You may use them for graphics and crafts applications, free and without special permission, provided that you include no more than ten in the same publication or project…However, republication or reproduction of any illustration by any other graphic service, whether it be in a book, electronic, or in any other design resource is strictly prohibited.”
In other words, you can make artworks which include these images, but you can’t (e.g.) copy the images and sell them as stock images yourself.
The books used to just be in physical format, but in recent years they have included CD-ROMs with the artwork on them digitised as vector images and ready for you to incorporate in your own projects. (And now an increasing number of the books are available in eBook format.)
So I ordered a copy of Fairies and Elves Vector Motifs (Dover Electronic Clip Art) from Amazon, and it arrived the next day.
I found three images where I liked different parts of the fairies, and then combined them into one single fairy and added some “Birthday Wishes” text:
Finished design for the laser-cut birthday card:
Here is a link to the “Fairies & Elves Vector Motifs” book.
…and here are some other similar books, but they maybe don’t have vector-format images:
“Children“
This week I’ve been developing William Morris-style laser cut birthday cards.
After a couple of days’ tinkering, I ended up with some really nice filigree designs of card toppers:
For the letters shown above, I bought the extended licence from Dreamstime, which is a website where you can buy royalty-free photos and vector-based illustrations.
Here are the art nouveau alphabet images that I used. Alternatively, you can enter your own search terms in the box below, to look for specific resources. For example, type “Art nouveau”, or “William Morris alphabet” in the box, and then click the ‘search’ button.
Another great resource that I’ve found for royalty-free designs is Vectorstock.com. They seem to have forgotten to use an apostrophe in the link/banner below, but they still do a brilliant range of illustrations. And because their files are all vector-based graphics, that means that they are usually very straightforward to cut with a laser cutter:
And at the moment (April 2018) both sites are even more useful if you have your own laser cutting business, because they can provide a little bit of extra income on top of your actual laser-cut products. You can either upload some of your own original designs and allow people to buy licences to use them, or can sign up as an ‘affiliate’.
For example, with Vectorstock I uploaded my elephant design so that other people with laser cutters can use it in their own designs. Then every time someone purchases a licence for the elephant, I receive a few cents, but there is no extra cost to the purchaser. Win/win!
Similarly, with affiliate links and referral schemes, you can also receive small payments just for pointing people towards something that they are already interested in. As another example, if you include the banners/ads for these services (like the ones shown above) you could receive a small payment each time someone signs up and/or purchases a licence.
Hope you enjoyed this post. Don’t forget to say ‘hi’ via the contact us page, or to tweet me @LaserSister if you’ve tried any of the above ideas or if you’ve got comments or questions.
(This post was originally on my KayVincent.com website, but now that I’ve got the LaserSister.com site I am moving or copying a lot of the laser-related articles over here. That way I should end up with a website full of posts relevant to laser-cutting, and can leave the other website/blog as a more general source of info.)
Here is a step-by-step tutorial on how to make quick and easy personalised Christmas tree ornaments with a laser cutter. It shows how to create a really simple round bauble shape that you can then etch with a message or image. Alternatively, you could decorate it by hand (or give/sell it to someone else so that they can decorate it by hand). If you’ve got access to a laser cutter then this could be a great (fast!) boost to your Christmas income.
If you don’t have time (or can’t be bothered) to go through the steps learning how to create the shape yourself, just click on the button below and it will take you to a (free) pre-made version of the design so that you can immediately start using it and cutting your own personalised Christmas baubles with your laser cutter. The vector design is done for you, so all you have to do is put your own text on there and it should be ready to cut.
The reason I’m using CorelDraw is because that is the recommended software for my particular laser machine, but most other vector-drawing software has similar commands and effects (although the tools and menus might be called something slightly different).
1) Start a new blank document in CorelDraw.
Mine uses millimetres as the measuring unit. If you want to change that, just click anywhere in the blank document and the “Units” dropdown should appear along the top somewhere:
2) Use the Ellipse Tool to create a circle 80mm wide
(Tip: Hold down the Ctrl key at the same time as you are drawing, to make sure you end up with a circle instead of an oval)
If the circle didn’t come out at exactly 80mm, you can change it. Make sure that the ‘Lock Ratio’ button is selected, then type “80″ into the width for “x:”
3) Use the Rectangle tool to create a rectangle 15mm wide by 9mm tall
If you don’t get exactly that size it doesn’t matter, but if you want to use precisely those dimenstions then:
4) Align the two objects on the same central line
Use the Pick tool to select the circle and rectangle. Then press “C” on the keyboard. This will make sure both objects are lined up vertically with each other.
(You can also go via the menu: Arrange> Align and Distribute> Align centers vertically)
5) Position the rectangle on the top of the circle
Use the Pick Tool to select just the rectangle.
Then either use the ‘down’ key on the keyboard to move the rectangle, or hold down the ‘Ctrl’ key and drag the rectangle downwards.
Aim to get the bottom corners of the rectangle just inside the circle:
Use the Ellipse tool to create a circle with a 5mm diameter. (Remember to hold down Ctrl + C to make it a perfect circle instead of an oval.)
7) Create a 12.5mm circle as the outside part of the ‘hanging loop’
Use the Pick Tool to select the 5mm circle, then duplicate or copy it*.
Then change the second circle so that it is 12.5mm across:
*To make a copy of any shape, you can do this by selecting the shape then:
8) Link the two circles to convert them into just one object
Use the Pick Tool to select both circles. Then press Ctrl + L to link the two objects together to make them into one doughnut-shaped hanging loop (this is important for a Step 12 later, when the ring is ‘welded’ to the rectangle shape).
9) Align the hanging loop and rectangle
Use the Pick Tool and highlight the bauble and the rectangle at the same time (e.g. either draw a box around them both, or select one shape then hold down the Shift key while selecting the other shape.) Then press “C” on the keyboard to align them both on the same central line.
10) Reposition the hanging loop
Use the Pick Tool to select the hanging loop, then move it down (using the cursor key, or hold down “Ctrl” button at the same time as dragging the object down) until the bottom of the loop overlaps the top of the rectangle:
Use the Pick Tool (and hold down the “Shift” key) to select the rectangle and large circle at the same time.
…then use the Shaping Tool to create a boundary. This will now be the main bauble shape.
You can find this tool via Arrange > Shaping > Boundary (make sure that you un-select “Place Behind selected” and “Leave Original Object(s)”):
12) Weld the hanging loop and main bauble shape together
Use the Pick Tool to select the hanging loop, then click the “Weld to” button
(If you can’t see the Weld To button, you can find it in Arrange > Shaping > Weld.)
Then click on the outline of the main bauble shape, and the two shapes should then weld together.
You should now have a simple bauble shape, ready for cutting!
Now you can use the Text Tool to add a personal message for etching onto the ornament, which will make a really quick and easy gift for someone.
Speaking of Christmas – here is a gift for you! I’ve created a free downloadable file for you to use with your own laser cutter, if you like. Just click the button below and it will take you to the downloadable resource.
I hope you found the above tutorial useful. Let me know if you’d like any more!
Here is a roundup of what I’ve recently been researching and saving to Pinterest.
I thought if I listed those findings here (and gave links to them) then these ready-made resources might save other people time and effort.
Hopefully you might even find some inspiration for your own craft projects.
So far this month I’ve created a Pinterest board for the following area of research:
Alphabet: Initial letters to display on children’s doors.
I then used this general inspiration about shield shapes to come up with a design for a shield-shaped door plaque (click here for tutorial on how to make a shield door plaque with children’s initials.)
Have you made anything similar, or seen any good (preferably free) resources that might help other people? If so, please do comment or use the contact form, or tweet @LaserSister
