Decorative Vector Ornaments: Paper cut 009

This is Day 9 of my mission adapting/cutting designs from the “922 Decorative Vector Ornaments” book (as mentioned in this post.)

This one took nearly an hour to cut. I was using a fairly blunt scalpel blade, so I really should have changed it, but (1) I couldn’t be bothered, and (2) it feels a bit wasteful to change a blade every time I cut a new design.

When I start tearing and stretching the paper I know that it’s really time to change the blade. So I guess the next piece will be cut with a new blade. (See if you can spot where I accidentally ripped this one):

Decorative Vector Ornaments: Paper cut 008

Day 8 of my mission to adapt/cut all of the designs in the “922 Decorative Vector Ornaments” book (as mentioned in this post.)

This one only took about twenty minutes to cut (while watching a recorded episode of Antiques Roadshow):

 

 

 

 

Decorative Vector Ornaments: Paper cut 007

This is the seventh day of my quest to adapt/cut all the designs in the “922 Decorative Vector Ornaments” book (as mentioned here).

It’s very similar to this cut (below) from a post a few days ago…

…but they’re not identical:

 

 

Decorative Vector Ornaments: Paper cut 006

Day 6 in my adventure adapting/cutting all of the designs in the “922 Decorative Vector Ornaments” book (as mentioned here).

This was a fairly big and detailed design so it took a few days to finish. Even though the lower lines have gone wiggly because the paper got a bit stretched, I still quite like it:

Decorative Vector Ornaments: Paper cut 005

Today is Day 5 of my quest to adapt/cut all of the designs in the “922 Decorative Vector Ornaments” book (as mentioned here). Another busy day today, so another fairly quick and easy piece to cut:

Decorative Vector Ornaments: Paper cut 004

Day 4 of my quest to adapt/cut all of the designs in the “922 Decorative Vector Ornaments” book (as mentioned here).

Decorative Vector Ornaments: Paper cut 003

This is Day 3 of my mission to adapt/cut all of the designs in the “922 Decorative Vector Ornaments” book (as mentioned in this post).

This one had quite a few floating dots in the original design that I had to leave out of the papercutting, and other parts of the design needed to be joined together with little lines (otherwise they would have just fallen on the floor because they weren’t attached to anything). Also I needed to enlarge the designs a bit, because otherwise I don’t think it would have been possible for me to get all of the details.

I like the overall effect of this one, but I did mess up a few times. See if you can spot where!

Paper cut 002

I am now on Day 2 of my mission to adapt/cut all of the designs in the “922 Decorative Vector Ornaments” book (as mentioned in this post).

I actually quite like this one, for a change!